edcforums

Hearing Aid Batteries

Forums Forums Gear – The Stuff We Carry Electronic Devices Hearing Aid Batteries

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • #106417
    admin
    Keymaster

    Hope you are not bothered by this problem. I inherited hearing loss and at this point without working AIDS my life is sounds of silence. My on person EDC includes size 10 lithium batteries for my AIDS but I would love to find a better way to carry the batteries than shoving the pack in my pocket. Any help or suggestions would be appreciated. I go through 2 batteries in 4 days.

    Sent from my iPhone using Tapatalk

    #106433
    admin
    Keymaster

    Mine uses size 13’s. I keep extras in my earbuds case in my pocket. I’ve used a little mint dispenser too.

    Sent by owl post.

    #106435
    admin
    Keymaster

    Thanks. Looking into earbuds case.

    Sent from my iPhone using Tapatalk

    #106437
    admin
    Keymaster

    Dad took some cheap throwaway plastic pens that his batteries would fit inside the barrel. Remove the guts, slide the batteries inside, (the hard part) take the end cap off a matching pen, and cap off. His are size 13 and I have no clue what brand the pens started out as or where he even got them.

    #106439
    admin
    Keymaster

    Thank you. Will give it a go.

    Sent from my iPhone using Tapatalk

    #106442
    admin
    Keymaster

    In the belt pouch for my cell phone.

    Sent from my Nexus 6P using Tapatalk

    #106450
    admin
    Keymaster

    What !!??…I carry mine in little zip locks…one to a bag…then put them a snus can.

    2 Panther

    #106452
    admin
    Keymaster

    How about an altoids tin the small one.

    #106453
    admin
    Keymaster

    A friend of mine uses a tube that formerly held mechanical pencil eraser refills.

    Sent by owl post.

    #106457
    admin
    Keymaster

    Hmm… I carry my 13s in the 8-pack they came in. I put a rubber band around it to keep it from rotating.

    #106460
    admin
    Keymaster

    How about one of them tiny aluminum pill fobs? The one I have is maybe an inch tall X 1/4″ diameter? add some insulation good to go.

    #106469
    admin
    Keymaster

    I take a large drinking straw, cut about 20mm off, seal the end with pliers and a lighter, pop a couple of batteries in it and seal the other end. I can fit a couple of those in a keychain capsule.

    #106474
    admin
    Keymaster

    [​IMG]
    Thanks for the suggestions. I adapted the ideas and now carry a Ti tube lined with a soda straw and filled with 10 batteries. Working great.

    Sent from my iPhone using Tapatalk

Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.