Is this a good idea?

[admin]

With all of the metal gear I carry, one EDC item I like to have on me is oil. Actually I typically carry WD40 which is a combination solvent/lubricating oil. A requirement for all my EDC gear is a robust build that resists crushing and wear. I find that most lubricants come in plastic or thin metal containers which quickly break down and ultimately lead to nasty leaks. An old tradition with military rifles are stout metal oilers. You can find excellent examples from the Civil War up until WWII. Here is an example from a M1 Carbine:

Another one I use is a brass repro I bought from a member of this forum. I use this a part of a maintenance kit in a knife sheath:

These work quite well, but I have a few issues with them.

1. They do not hold much, particularly if you are using solvent/oil combos like WD40. I would like to have one that holds more.
2. Due to the narrow opening, they are difficult to fill and to gauge how much oil remains.
3. They are too narrow and can not be reliably set down since they tend to tip over.
4. The applicators are prone to breaking and do not hold much oil for application.

The design below is an attempt to address these issues. First I went with a wider body that will hold more oil and sit more securely when set down. Secondly I went with a two size opening. A narrow opening for pouring small quantities and a wider top for filling the bottle, pouring larger quantities and for inspecting how much remains. Finally, with the applicator I went with a removable design (threaded) that can be replaced if broken or removed if an applicator is not wanted. Additionally two small holes allow for more oil to stick to the applicator.

I’m interested in having a batch of these made, but I would need to sell of some to make the run affordable. I thought I would first see if this is something that appeals to other EDC mindset folks or if I’m just crazy. If people here think this is a good idea, I would then proceed to post a feeler in BST with cost estimates etc.

Here is the design:

[Author]

Posts